Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

need a help with design of led matrix display

Status
Not open for further replies.

mayena_19

Newbie level 4
Joined
Jan 19, 2010
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
philippines
Activity points
1,320
need a help

im planning to make my own led matrix display which will be interface to the PC through parallel port.. I<m planning to use the 4017 and 16f84..but Istill dont have a clear vision of how will I do it.. Is there anybody that could help me??
 

Re: need a help

can you please elaborate it more?? im sorry I just can't catch-up..
 

need a help

Hi mayena_19,
do you mean pls "CD (or so)4017", the counter?
K.
 

Re: need a help

yes.. that cd4017 johnson counter..im thinking if i can use 4017 only without needing to use PIC
 

need a help

Hi,
Did you check it?
#1229503
K.
 

Re: need a help

karesz said:
Hi,
Did you check it?
#1229503
K.


to karesz:
yes i'd checked it but still I didn't get idea..sorry, but im planning to use 4017 and pic 16f84 but if poossible to use 4017 only..cause im having trouble with microcontrollers..And im using %x7 led dot matrix
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top