Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Near Field RFID tag antenna

Status
Not open for further replies.

sun&moon

Newbie level 5
Joined
Aug 6, 2007
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,344
Where can I find the near field RFID tag antenna model in HFSS?

Anyone has recommendations?
 

what s your frequency?

if it is 860-920 Mhz.(cos structure size) Try to model it wit ansoft designer. not HFSS. it ll be easier. and near field excited with loop lined up to chip. so just examine the commercial tags. after that you need the impedance of chip and suitable loop lenghts.

good luck.
 

Thanks. Frequency will be 860-920 Mhz. I would like to know the design steps.

1 Simulate structure, get the tag impedance, using chip impedance value and tag impedance to calculate return loss, the return loss should be >10 dB over 860-920MHz

2 check the near field to know more about the meachanism of antenna. What prameters should I check?


The step one is right? How to get read distance for near field?

Anyone can gives me some instructions? very confused.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top