Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Near Field Patterns in CST Microwave studio

Status
Not open for further replies.

S_N_A

Newbie level 4
Joined
Apr 24, 2014
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
34
Hi Everyone,

Could someone please help me with plotting the near field patterns in CST MWS, I know that farfield patterns can be achieved by using the field monitors but I am not sure if there is such a procedure for near field patterns.

Bests
 

You use the normal monitors (H,E), see the attached pdf:
 

Attachments

  • Slides_Talk_10_4.pdf
    2.1 MB · Views: 173
  • Like
Reactions: wave85 and S_N_A

    S_N_A

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating

    wave85

    Points: 2
    Helpful Answer Positive Rating
You use the normal monitors (H,E), see the attached pdf:

Thanks for your reply, I can't see the pdf, did you upload one?

Regards

- - - Updated - - -

Hi again,,

got the pdf, thanks a lot :)

Do you know if there is a way to find field at a particular distance from the antenna?

Bests
 

For example, you can use a 2D-monitor plane and change the distance from your design.
 
  • Like
Reactions: S_N_A

    S_N_A

    Points: 2
    Helpful Answer Positive Rating
For example, you can use a 2D-monitor plane and change the distance from your design.

Thanks a lot once again.
BTW have you used Microstripes for near field analysis? When I typed in near field in CST help it gave me the Microstripes package as a solution which I couldn't figure out how to use! I tried it and it keeps on giving me errors in excitation of the model.
Thanks for your help!

Regards
 

What kind of errors? Post the messages please.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top