Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

National instruments gpib receiving and spying data

Status
Not open for further replies.

nebisman

Full Member level 4
Joined
Apr 13, 2002
Messages
226
Helped
10
Reputation
22
Reaction score
9
Trophy points
1,298
Activity points
1,849
I need to find an error over a GPIB bus, and I need to spy the protocol over a gpib bus that have a GPIB active controler from a machine . I need to convert my PCI-GPIB card as nonactive controller or listener and spy the protocole over the bus. I have tried with diferent commands using the program IBIC and the configuration utility (uncheking the active controlle option) but I haven't results and ever I made a conflict over the bus. Coud you send me a complete example for do it.

thanks
nebisman
 

soundar

Advanced Member level 4
Joined
Sep 26, 2003
Messages
109
Helped
15
Reputation
30
Reaction score
3
Trophy points
1,298
Location
Chennai, India
Activity points
567
National Instruments is providing a utility 'NI-Spy' to capture all the GPIB, VISA Calls.

This will be installed when you install NI PCI-GPIB card.

Run this utility and press capture to collect all the data transmitted and recieved.

You can get more low level information other than commands.

..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top