khabmj
Newbie level 4
- Joined
- Oct 10, 2007
- Messages
- 5
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,313
Dear Experts,
I am Designing a Narrowband (30 MHz) Dual Mode Band Pass Filter. I have done the HFSS simulations inside the cavity of (30*30*30mm) with a cross shaped dielectric resonator. I have a also generated a lumped element model in ADS of the same filter. My Question is how can i model or correlate the input, output and mutual couplings from my lumped element model with the HFSS model so that both models are comparable. Any example or tutorials in that regard would be extremely useful. Waiting for your input.
Best Regards,
Khawar:shock:
I am Designing a Narrowband (30 MHz) Dual Mode Band Pass Filter. I have done the HFSS simulations inside the cavity of (30*30*30mm) with a cross shaped dielectric resonator. I have a also generated a lumped element model in ADS of the same filter. My Question is how can i model or correlate the input, output and mutual couplings from my lumped element model with the HFSS model so that both models are comparable. Any example or tutorials in that regard would be extremely useful. Waiting for your input.
Best Regards,
Khawar:shock:
