Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Nangate open cell library

Status
Not open for further replies.

Eman kamel

Junior Member level 2
Joined
Oct 2, 2005
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,433
hello every body
i am using open cell library for 45 nm technology
i am trying to get technology information for semi global metal layer
the lef file contain 8 metal layers, i do not know which layer is considered semi global?
also if i used metal 5 layer as an example i found

LAYER metal5
TYPE ROUTING ;
SPACINGTABLE
PARALLELRUNLENGTH 0.0000 0.9000 1.8000 2.7000 4.0000
WIDTH 0.0000 0.1400 0.1400 0.1400 0.1400 0.1400
WIDTH 0.2700 0.1400 0.2700 0.2700 0.2700 0.2700
WIDTH 0.5000 0.1400 0.2700 0.5000 0.5000 0.5000
WIDTH 0.9000 0.1400 0.2700 0.5000 0.9000 0.9000
WIDTH 1.5000 0.1400 0.2700 0.5000 0.9000 1.5000 ;
WIDTH 0.14 ;
PITCH 0.28 ;
DIRECTION HORIZONTAL ;
OFFSET 0.095 0.07 ;
RESISTANCE RPERSQ 0.21 ;
THICKNESS 0.28 ;
HEIGHT 1.71 ;
CAPACITANCE CPERSQDIST 1.3527e-05 ;
EDGECAPACITANCE 2.3863e-06 ;
END metal5
how this give me link width ,height , thickness and spacing in units of micrometer?
thanks in advance
Eman
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top