Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

named capture procedure in tetramax?

Status
Not open for further replies.

ed168

Newbie level 3
Joined
Nov 4, 2009
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
Hi,

Is there a structure in Synopsys Tetramax corresponding to named capture procedure in Mentor Fastscan?

Thanks.
 

Hi, Santhosh,

Thanks for the reply. Can you show me one example?

For example, suppose I have the following named capture procedure in Fastscan, this is manually written for at speed scan based on manual, I am not sure if it is completely correct.

procedure capture clk1 =
condition /clkctrl/dff0/q 1;
condition /clkctrl/dff1/q 1;
mode internal =
timeplate tp_int;
cycle =
force_pi;
pulse /clkctrl/pll1/clk1;
cycle =
pulse /clkctrl/pll1/clk1;
force slow_clk 0;
end;
end;
mode external =
timeplate tp_ext;
cycle =
force scan_en 0;
force_pi;
pulse slow_clk;
end;
end;
end;
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top