Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

n-select and p-select layer

Status
Not open for further replies.

carrot

Full Member level 3
Joined
Feb 23, 2004
Messages
182
Helped
9
Reputation
18
Reaction score
4
Trophy points
1,298
Location
Bangalore, India
Activity points
1,532
Hi

While making layout, there are different layers available. Of which i did not what is n-select layer and p-select layer. When is this layer used?
 

If you are talking of N-type and P-type diffusions then you basically use this for making the transistors by inserting a poly strip in between.

Apart from this there is an active region which can be specified by the type of well you are creating on the substrate. N-well and P-Well
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top