ravimarcus
Full Member level 4
- Joined
- May 9, 2005
- Messages
- 218
- Helped
- 31
- Reputation
- 62
- Reaction score
- 12
- Trophy points
- 1,298
- Location
- Bangalore, INDIA
- Activity points
- 2,797
18f2320
Hello Everyone,
Searching for OSD solution finally made me come up with a design on my own using PICmicro 18F2320.
The PCB is single side. The uC is running on 10MHz crystal + PLL enabled. The PICmicro here is NOT overclocked.
The Video sync seperation has been done using the internal comparator.
The Vsync is identified in software and then the frame is started.
Will develop the code for RS232 interface when I find time.
Cheers
Ravi
Hello Everyone,
Searching for OSD solution finally made me come up with a design on my own using PICmicro 18F2320.
The PCB is single side. The uC is running on 10MHz crystal + PLL enabled. The PICmicro here is NOT overclocked.
The Video sync seperation has been done using the internal comparator.
The Vsync is identified in software and then the frame is started.
Will develop the code for RS232 interface when I find time.
Cheers
Ravi