Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

my Freescale microcontroller ADC (12 and 16 bit) unstable plz help me....

Status
Not open for further replies.
V

veereshmps

Newbie level 4
Newbie level 4
Joined
Mar 15, 2013
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,328
one more thing when i connected external ADC input (load cell sensor) source the last digit getting fluctuating and i tried in 12 and 16 bit also .as of my thinking y it is getting is when the mc busy with some other tasks (digital switching) with analog switching (ADC) at that time it may occur write ? and we are using Freescale 8bit mc and its having inbuilt ADC maximum 16 bit with Vref is 3.3V so, the s tep size V will be very less and if any ground fluctuating is there also it will affect to ADC wrt, or if any Softwere issue is there means plz suggest me as soon as possible this is my very imp project.
 

Attachments

  • MC9S08LH64_brief.pdf
    2.5 MB · Views: 92
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top