Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
gate should be ground with a resistor . which can be 10k (suitable).
the main thing is to maintain gate voltage that shuld not be less then switching voltage.
your gate to ground resistor and gate resistor makes a voltage devider which decide gate voltage.
you shuld calculate these resistor to make result of 10v of Vgs.