Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

MSP430 EMI/EMC performance

Status
Not open for further replies.
S

suryakant

Member level 5
Joined
Mar 10, 2005
Messages
90
Helped
6
Reputation
12
Reaction score
0
Trophy points
1,286
Location
India
Activity points
2,171
Hi all,
Is EMI/EMC performance benchmarking available anywhere on net?
I ve heard from lot of people that "EMI/EMC performance of MSP430 is poor in industrial environment. use it only for consumer application"

Is this true? Please provide some guidelines.
 

Hi suryakant,

Can't provide you with any hard data to support this, but from my experience the MSP430 is much more adapted to low-power consumer electronics products. We designed a couple of industrial controls with the MSP430 and although it's far from impossible, I found out that other MCUs would have been better.

Good luck,

cyberblak
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top