Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

MPC8548E development platform from Micetek

Status
Not open for further replies.

tanekone

Newbie level 5
Joined
May 8, 2012
Messages
8
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,382
MICETEK provides a quicker and more convenient solution of development system for Freescale PowerPC processor family, which consists of MPC85XXE processor card and two kinds of carriers for different application. Combined with MPC8548E processor card (MPC8548EPC), Type-N carrier can be used for network communication application, while Type-A for ATCA/MicroTCA chassis. It reduces the design cycle and saves the investment for the designer.

Solution 1: MPC8548E development platform (MPC8548E processor card + Type-N carrier)

Application: Network communication application

Model: MT8548E-N

Features

· CPU: Freescale MPC8548E, with frequency speed up to 1.3GHz; Performance: 3065MIPS

· Memory:

— 256MB DDR1 SDRAM

— Flash: up to 16 Mbytes

· Interfaces:

— Four Gigabit Etherset ports

— Two PCI slots

— One PCI-Express slot

— One RS-232 port

· Other ports on MPC8548EPC

— COP interface

— 5V fan connector

— 3.3V and 5V power supplied from a carrier board

— Dimension: 147mm x 70.9mm

· Other ports on Type-N carrier

— 12V and 5V power supplied from 4-pin connector

— Dimension: 220mm x 148mm

 

Solution 2: MPC8548E development platform (MPC8548E processor card + Type-A carrier)

Application: AMC card for ATCA or MicroTCA system

Model: MT8548E-A

Features

· CPU: Freescale MPC8548E, with frequency speed up to 1.3GHz; Performance: 3065MIPS

· Memory:

— 256MB DDR1 SDRAM

— Flash: up to 16 Mbytes

· Interfaces:

— Two Gigabit Etherset ports

— Two PCI slots

— PCI-Express and SRIO:

--PCI Express X8, or

--PCI Express X4 and SRIO X4

— One RS-232 port

· Other ports on MPC8548EPC

— COP interface

— 5V fan connector

— 3.3V and 5V power supplied from a carrier board

— Dimension: 147mm x 70.9mm

· Other ports on Type-N carrier

— 12V and 5V power supplied from 4-pin connector

— Dimension: 180mm x 74mm

 

Solution 3: UTCA8548E system (Including two sets of MT8548E-N and UTCA chassis)

Application: ATCA or MicroTCA system

For more information, please feel free to contact me at xuyn@micetek.com.cn or visit our webiste www.micetek.com
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top