lachini
Newbie level 1
Hi,
I design new USBasp programmer to easy and safety use.
Why my USBasp easy to use ?
- You just insert all chip from pin 1 on ZIF socket. programmer detected chip without any jumper or switch setting!
- You set CKSEL and CKDIV8 fuse bits to every options you want. Don't Worry! USBasp programmer generate clock on ZIF socket and ISP connector for XTAL1 AVR pin.
- You can Program 89S5X mcu same AVR Chip!
- You can Program I2C 24CXXX EEPROM
- You don't need any jumper or switch setting. it is fully automatic detection chip's.
- my USBasp programmer is very small and pocket size : (71 x 46 x 19 mm)
- my USBasp programmer has BOX.
==================
you can get more details :
http://www.elewiz.com/en/83-product/90-usb-programmer.html
==================
I design new USBasp programmer to easy and safety use.
Why my USBasp easy to use ?
- You just insert all chip from pin 1 on ZIF socket. programmer detected chip without any jumper or switch setting!
- You set CKSEL and CKDIV8 fuse bits to every options you want. Don't Worry! USBasp programmer generate clock on ZIF socket and ISP connector for XTAL1 AVR pin.
- You can Program 89S5X mcu same AVR Chip!
- You can Program I2C 24CXXX EEPROM
- You don't need any jumper or switch setting. it is fully automatic detection chip's.
- my USBasp programmer is very small and pocket size : (71 x 46 x 19 mm)
- my USBasp programmer has BOX.
==================
you can get more details :
http://www.elewiz.com/en/83-product/90-usb-programmer.html
==================
Last edited by a moderator: