ajays2539
Newbie level 4
plz help me on silvaco tcad every time i am simulating structure of photodiode ,its showing following error.
ERROR : Cannot read file 'mymulti01_2.log' : Result too large.
ERROR : Initialization has not been performed.
i tried by reducing mesh size to 1
x.mesh loc=0.00 spac=0.25
x.mesh loc=1.0 spac=0.25
#
y.mesh loc=0.00 spac=0.1
y.mesh loc=0.20 spac=0.1
y.mesh loc=0.60 spac=0.1
y.mesh loc=2.0 spac=0.1
y.mesh loc=6.50 spac=0.1
ERROR : Cannot read file 'mymulti01_2.log' : Result too large.
ERROR : Initialization has not been performed.
i tried by reducing mesh size to 1
x.mesh loc=0.00 spac=0.25
x.mesh loc=1.0 spac=0.25
#
y.mesh loc=0.00 spac=0.1
y.mesh loc=0.20 spac=0.1
y.mesh loc=0.60 spac=0.1
y.mesh loc=2.0 spac=0.1
y.mesh loc=6.50 spac=0.1