Re: Reading schematic values
Hi,
now its more obvious.
All capacitance I see are in uF
The /2k after the capacitor value is the voltage. You see "CY" is a special safety cpacitor. Also C12 should be a "Y" class safety capacitor.
all resistors in Ohms.
The /1 after a resitor value most probably is the power dissipation in W, but imaybe it is a random "size" description.
Here R12 should be rated for high mains voltage. A 0603 chip resistor for example won´t do the job.
The schematic is not very consequent in giving these values. Sometimes they exist, sometimes not.
A doubtful R10, P3 combination.
Missing voltage of C5, C6...
and so on.
Klaus