Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Moved]: My headset broken and I need serious help !!

Status
Not open for further replies.

Mohammad D

Newbie level 4
Joined
May 22, 2015
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
58
Hello,
Am new in the forum and I have a serious problem ... my $40 headset that works for almost a year just get ruined because I use it for gaming and to watch Youtube or listen to music .... sooo I had so much things to buy this year and I cant afford another headset for another 60 or 80 bucks !!
I google my issue and I almost get a solve then I decided to post my prob here so workteam can help me solve it .
as I said I had $40 Sonic headset (not popular) and its USB , it had a mic on it , recently I open it and try to fix it but with no resort ... well I fix the mic wiring problem but the major issue still .. the headset provide sound form the left ear louder than the right ear (the left ear give me normal sound but the right ear not) .. after I open it I saw that the blue and the other copper wire comes from the right ear is cut but the thing is it provide a little sound from it :shock::shock::shock:
I fix the mic problem but the sound difference stand still.
can anyone help me fix it because it mean so much to me.
Thanks :!::!:
 

SunnySkyguy

Advanced Member level 5
Joined
Sep 26, 2007
Messages
6,743
Helped
1,675
Reputation
3,348
Reaction score
1,644
Trophy points
1,413
Location
Richmond Hill, ON, Canada
Activity points
50,732
Re: My headset broken and I need serious help !!

Wiring capacitance may generate little sounds.
Cheap headset suffer from poor design from newbie Chinese engineers and lack of strain relief. The fine wire strands are possibly AWG48 making them weak and prone to jerk failures.

Your only solution is to repair it and add polyurethane strain relief.

Personally i prefer SkullCandy ear buds for comfort and quality.
Cheap but not rugged so don't yank that cord.
 

Mohammad D

Newbie level 4
Joined
May 22, 2015
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
58
Re: My headset broken and I need serious help !!

Wiring capacitance may generate little sounds.
Cheap headset suffer from poor design from newbie Chinese engineers and lack of strain relief. The fine wire strands are possibly AWG48 making them weak and prone to jerk failures.

Your only solution is to repair it and add polyurethane strain relief.

Personally i prefer SkullCandy ear buds for comfort and quality.
Cheap but not rugged so don't yank that cord.

Thank you for your assistant but you didn't read what am trying to solve
my issue is with wiring the right speaker not about cheap headset or what's what you prefer (I don't like the earbuds for gaming or listen music at all !!)
so again I need help with wiring the RIGHT SPEAKERRR and if you need any photos taken form my headset it would be my pleasure.
thanks for all :D
 

uday mehta

Advanced Member level 4
Joined
Dec 30, 2011
Messages
105
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,298
Activity points
1,979
Re: My headset broken and I need serious help !!

open left ear of your headset, check it and make connection of right ear in same way. or for more understanding post an image of your opes headset.
 

Mohammad D

Newbie level 4
Joined
May 22, 2015
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
58
Re: My headset broken and I need serious help !!

open left ear of your headset, check it and make connection of right ear in same way. or for more understanding post an image of your opes headset.

Thanks for your reply ... I open the left and right ear
the right ear wiring perfect but it seems the issue comes from the left ear

the connection like this :
from the usb there is 1 copper 1 red wires connected to the mic hub and 1 blue and 1 red-copper wires comes from usb connected to the left speaker
there is a pair or wires comes from the right speaker (red and copper) ... the copper is connected to the left speaker and the red that soldered with a green wire (that comes from the usb) are cutted and I don't know where to put them.

I figure that the left speaker produce louder and much better sound (and had much more bass) than the right speaker BUT keep in mind that I still can hear sound from the right speaker but with less info

for much detailed about my prob I might post a photo of my headset .
thanks.
 

Mohammad D

Newbie level 4
Joined
May 22, 2015
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
58
Re: My headset broken and I need serious help !!

Hey,
this is my broken headset photos that I picked after I open it up :
https://obrazki.elektroda.pl/1412158700_1432897349.jpg
https://obrazki.elektroda.pl/6322620700_1432897351.jpg
https://obrazki.elektroda.pl/5008411900_1432897354.jpg
https://obrazki.elektroda.pl/8844148300_1432897360.jpg

so yeah I really hope that I found out a solve for this
and for those whom didn't get my problem its all about the right ear ... left ear provides much more sound than the right ear.
left ear had bass on it but the right is not
please help me solve this cuz its mean so much to me
Thanks.
 

BradtheRad

Super Moderator
Staff member
Joined
Apr 1, 2011
Messages
14,006
Helped
2,789
Reputation
5,576
Reaction score
2,696
Trophy points
1,393
Location
Minneapolis, Minnesota, USA
Activity points
104,476
Re: My headset broken and I need serious help !!

The problem can be in the wires, or it can be in the transducer.

* Are you able to unsolder wires from the bad transducer? Then test the transducer alone by applying an audio signal.

* Be careful not to yank on wires. Those are very thin wires running to the voice coils. If you break one you'll have a tough time fixing it.

* Do not apply heat longer than necessary, or you will melt the plastic. The solder pads might come loose.

* Can you test the wires with an ohmmeter? Test each for continuity. Test them for crosstalk. It's better for the transducers if you unsolder them first.

* Long-time use (or use at high volumes) can eventually cause breaking of wires to the voice coil. I don't know of a way to solder tiny wires in such a small space.

* Bend the wires, wobble the plug, to get a hint whether an internal wire has bad contact. You might have intermittent contact, or reduced volume. You might need to rewire it. I find that 4-wire telephone cord is suitable.
 

betwixt

Super Moderator
Staff member
Joined
Jul 4, 2009
Messages
14,867
Helped
4,857
Reputation
9,732
Reaction score
4,640
Trophy points
1,393
Location
Aberdyfi, West Wales, UK
Activity points
126,548
Re: My headset broken and I need serious help !!

Those look like cheap Chinese headphones - no matter what you actually paid for them! I appreciate you may think they are high quality but they come off a production line and retail at about $5 in the mass market.

There is nothing in them except a mic, two loudspeakers and the wiring. If the wires have broken there will be no sound at all so I'm afraid the problem is almost certainly that the quiet loudspeaker has broken. you will not be able to find a replacement. You mention it is a USB headset, if the fault is in the USB circuits again you will not be able to repair it. The parts will be virtually impossible to obtain and you need special equipment to unsolder and resolder the components.

Sorry to bring you bad news.

Brian.
 

Mohammad D

Newbie level 4
Joined
May 22, 2015
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
58
Re: My headset broken and I need serious help !!

Yeah thanks guys for your help and as you all said its not worth repair it !!
Then am asking this great community of the PlayStation Wireless Gold Headset for my PS4 and listen to music .. is it good >?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top