Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Moved]Hiring- Radio Controller Programmer/Engineer!

Status
Not open for further replies.

joshusa

Newbie level 3
Joined
Jul 15, 2012
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,303
This is what I need:

A prototype with 3 main components:

A) Sensor
B) Transmitter
C) Micro Receiver

Basically, the sensor's job is to detect motion of an object, then the send the confirmation signal to the transmitter, which will transmit information to a handheld device located 5-10 miles away. The receiver will then display that the motion sensor has been activated, and show the time it was activated. I would like to know if this information is possible to be transmitted VIA GPS, and also if it's possible to send digital pictures to the receiver. The receiver must be portable and fit on a keychain.

PM me if you can build this prototype.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top