Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Moved] GSM GPRS SIM900A Development Board Not Working

Status
Not open for further replies.

Devon Ravihansa

Newbie level 2
Joined
Jun 17, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
11
I have got GSM GPRS SIM900A development board
but I failed to run it with Arduino Uno/Single.
When I am connecting with PCthrough serial(rs232) or via USB(prolific USBto serial converter)port its getting detected and i could able to connect using hyper terminal.. when i give AT commands it doesn't replies back anything.. what may be the problem its not working with any commands.. i set baud rate 9600,8bit,flow control none,parity none,stop bit 1.. and 19200-8-N-1 with Flow Control Hardware also. anyone suggest PLz what may be the reason.
And,
Some examples to do so with Arduino Uno.... and with single
-Send SMS, MMS
-Send Email,Connect to Internet Send Details and Control ---Some Equipment s from the response
-Make a Simple Server, as Ethernet Shield do
-Sim ToolKit Access(via AT Commands)
-Controlling via AT Commands
etc........
Thanks in Advanced....!!:)
 
Last edited:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top