[Moved] Gprs Socket Server With Sim900 and Arduino

[Dimitris KOutsos]

I have Gsm shield sim900 and I try to create a TCP server but the Server no response..
Mainly I want to create TCP server the gprs Shield and then send data to the client.

My Code is :

#include <SoftwareSerial.h>
SoftwareSerial mySerial(7, 8);
void setup()
{
mySerial.begin(19200);               // the GPRS baud rate   
 Serial.begin(19200);    // the GPRS baud rate
 delay(500);

 mySerial.println("AT+CSQ");    //Signal Quality Report
 delay(2000);
 ShowSerialData();


 mySerial.println("AT+CREG?");  //Attach or Detach  from Gprs Service
 delay(2000);
 ShowSerialData();
 
 
 mySerial.println("AT+CGATT?");  //Attach or Detach  from Gprs Service
 delay(2000);
 ShowSerialData();
 
 
mySerial.println("AT+CGATT=1");  
 delay(2000);
 ShowSerialData();
 
 
   mySerial.println("AT+CGDCONT=1,\"IP\",\"INTERET\" ");
 delay(2000);
 ShowSerialData();

 
   mySerial.println("AT+CIPCSGP=1,\"INTERNET\",\"\",\"\"");
 delay(2000);
 ShowSerialData();
 


  mySerial.println("AT+CSTT=\"INTERNET\",\"\",\"\"");
 delay(2000);
 ShowSerialData();


 
  mySerial.println("AT+CIICR");
 delay(2000);
 ShowSerialData();
 
  mySerial.println("AT+CIFSR");
 delay(2000);
 ShowSerialData();
 
 
  mySerial.println("AT+CLPORT=\"TCP\",\"5000\"");
 delay(2000);
 ShowSerialData();

 
 mySerial.println("AT+CIPSERVER=1,5000");
 delay(2000);
 ShowSerialData();



  mySerial.println("AT+CIPSTATUS");
 delay(2000);
 ShowSerialData();
 
 




}
void loop(){

if (Serial.available()){

switch(Serial.read()){
case 't':
     mySerial.println("AT+CIPSTATUS");
     delay(2000);
     ShowSerialData();
     
       mySerial.println("AT+CIPSEND");
     delay(2000);
     ShowSerialData();
     
   break;
}

}
}
void ShowSerialData()
{
 while(mySerial.available()!=0)
   Serial.write(mySerial.read());
}

The AT+CIpStatus it Says STATE: SERVER LISTENING but when i try to ping the Ip i take no answer any idea?

 

[Kosh]

Have you solved this?
I'm asking because I have the same problem. My suspicion is the GSM operator blocks inbound TCP connections.

But a friend of mine is using a PC with an USB GSM modem configured as a SERVER. And it works!
Will try to borrow his SIM card to do some tests.