Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[MOVED] CMOS VLSI Design. Threshold of CMOS regarding.

Status
Not open for further replies.

Prashanth.vinnakota

Advanced Member level 4
Joined
Apr 16, 2012
Messages
107
Helped
23
Reputation
46
Reaction score
22
Trophy points
1,298
Location
India
Activity points
1,868
Is there any dependence of Vth (CMOS inverter) on Temperature in 180nm technology?
If so wat relation can be given between µn and µp?
 

Re: CMOS VLSI Design. Threshold of CMOS regarding.

The threshold of CMOS inverter is dependent on mobilities of electrons and holes.

In that aspect it is clear there is a dependence on temperature because the carrier mobility is dependent on temperature.

So what i ask is how that dependence is in 180nm standard technology?
 

Re: CMOS VLSI Design. Threshold of CMOS regarding.

The threshold of CMOS inverter is dependent on mobilities of electrons and holes.
In that aspect it is clear there is a dependence on temperature because the carrier mobility is dependent on temperature.
Below pls. find the theory (Allen/Holberg).

So what i ask is how that dependence is in 180nm standard technology?
For this process size I found TC(Vth) between -1.0 and -1.6 mV/°C :
 

Attachments

  • Temperature_dependence_p95.pdf
    79.8 KB · Views: 144
  • Medium_Temperature-Coefficient_of_MOS_Vt_1,0.pdf
    49.4 KB · Views: 116
  • Medium_Temperature-Coefficient_of_MOS_Vt_1,3.pdf
    51.2 KB · Views: 138
  • Medium_Temperature-Coefficient_of_MOS_Vt_1,6.pdf
    48 KB · Views: 125
Re: CMOS VLSI Design. Threshold of CMOS regarding.

Below pls. find the theory (Allen/Holberg).


For this process size I found TC(Vth) between -1.0 and -1.6 mV/°C :

Sir,
It must be true because i found the threshold of each Inverter deviating slightly from mathematically calculated threshold when i went for designing in Cadence Virtuoso.

Thank you sir.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top