Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Mosfet power dissipation

Status
Not open for further replies.

nagendra.singh

Junior Member level 2
Junior Member level 2
Joined
May 27, 2011
Messages
23
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,283
Visit site
Activity points
1,416
I want to know which mosfet is good in term of power dissipation from data sheet.

I want to use STP80NF03L or STP95N3LL in 12volt dc to AC inverter .

From data sheet first first have power dissipation is 300w and second have 75w.RDS on almost same about 4mohm.

Which will be good ?
 

both mosfet have same rds on as 4 miliohm,Vds is 30 volt and Id 80 amp but power dissipation in datasheet is different. STP80NF03 have300w and 2nd have only 75w.

So pls tell me which will be better.
 

Could it be that the package is different and one conducts the heat away from the junction better.
Frank
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top