Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Mixed signal design - flow and price

Status
Not open for further replies.

soloktanjung

Full Member level 6
Full Member level 6
Joined
Nov 20, 2006
Messages
364
Helped
51
Reputation
100
Reaction score
43
Trophy points
1,308
Location
nowhere
Activity points
3,194
Hi,

I know about mixed signal design flow using either cadence or synopsys tools.
But I am not clear with the technology used to design the analog parts.
Let say, I design my digital blocks using 130nm, then how can I ensure that the analog parts will be according to 130nm technology?
Does the foundary has certain rules for the analog design associate with 130nm technology for example?

Second question is regarding the price.
For digital chip, the price will be based on the mmsq.
But for mixed signal chip, how is the price be set?

Thanks in advance for your kind respond.

Hairo
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top