Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

MIsmatch in current mirrors

Status
Not open for further replies.

deepa

Full Member level 2
Joined
Jul 3, 2005
Messages
127
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,298
Activity points
2,226
in current mirrors,the Vt mismatch seem to dominate,can anyone tell the physical interpretation of this
 

the implant ion is not equal every inch, so the vth will be different. Id is square of vth , so the different is large.
 

when adjusting the threshold, nonuniform ion implant causes unequal vth
 

h**p://ece-www.colorado.edu/~bart/book/book/chapter7/ch7_4.htm

Check above link
it depends on Cox and ion implantation concentration and final profile. Hard to control for both
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top