Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

microcontroller to 2 Ide devices

Status
Not open for further replies.

minos

Member level 1
Joined
Jul 11, 2002
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
192
someone has conected two IDE devices (cdrom,HDD) to one microcotroller??
 

Hi,

I think you just has to connect the 2 devices to the cable,
and the software has to know how to talk to them.

In the ATAPI protocol when initialising the drive
you must specify which one (0. 1. etc) to init.

Check the ATAPI doc, you can find it here:

h**p://www.t13.org/project/d1410r3a.pdf

Zed
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top