Microchip ICD Problem
Hi,
this is a known problem. If you use it with mplab, there is a screen on which you can see the voltage. Play with the resitors (RA0 and RA1) until you have the right voltage. You can also try to change the led with an other color (green). This led generates the referenz voltage. A another way is to play with the current through the led to get the correct voltages.
My ICD works with the following voltages:
VDD = 4,85 - 4,9V and VPP = 12,46 - 12,5 V.
After changes you can look with the "update" button for the new voltage.
Hope this helps.
Klemm