Micro controller based light dimmer

Status
Not open for further replies.
E

esweya

Newbie level 6
Joined
Jan 15, 2011
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Dar es Salaam Tanzania
Activity points
1,386
Hey guys I am dealing with above titled project,
I am using PWM CODES But i am facing a problem that my ac filament is blinking and not dimming
how can I solve the problem IN ORDER for the filament lamp to dim and not blinking.
THANKS IN ADVANCE
 

you need to increase the frequency of the PWM... 100Hz may work.

Edited:
I supposed you mean a small filament bulb supplied by a DC current otherwise the solution would be totally different.
 

KerimF said:
you need to increase the frequency of the PWM... 100Hz may work.

Edited:
I supposed you mean a small filament bulb supplied by a DC current otherwise the solution would be totally different.
Click to expand...


HE is using small filament lamp with an AC current
Do you have any other solution I will appreciate that
 

Ok... Let us continue to the next question, since you are not a talker

You said the bulb is blinking. This means you are able to send a signal from your circuit (working on low voltage DC) to change the current in a load (the bulb) connected to the main power (240Vac, 50Hz).

What is your actual interface or driver? I have many possibilities in my mind
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…