Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Meshing for own FDTD code

Status
Not open for further replies.
M

magicfoot

Junior Member level 2
Junior Member level 2
Joined
Feb 20, 2011
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,461
Dear All,

I want to use a meshed/gridded input to my own 3D FDTD code. From scouring the web I have not found any pre-processor or other ready-made code that will generate the structured hexahedral cells required for the input.

Could I ask people as to what meshing tools or software they are currently using as input to their FDTD. In my own code I am currently hard coding features such as sources and reflectors. This hard-coding method has its limits.

Kind regards.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top