tok47
Advanced Member level 4
- Joined
- Jan 16, 2004
- Messages
- 119
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,296
- Location
- Kuala Lumpur, MALAYSIA
- Activity points
- 1,009
Dear ALL,
Recently, I found a problem when I create a frame in MENTOR GRAPHIC DESIGN ARCHITECT.
When I finish drawing my circuit. I need to add a frame with IF command. But I fail to do that. The command is like this ' if ml64_32 == "ml32" ' or ' if ml64_32 == "ml64" ' . The purpose for this command is I want to select between ml64 and ml32.
But I dont know why I cant pass the check and sure also I can't get the correct netlist.
Can any1 can help me on this?
Rdgs
tok
Recently, I found a problem when I create a frame in MENTOR GRAPHIC DESIGN ARCHITECT.
When I finish drawing my circuit. I need to add a frame with IF command. But I fail to do that. The command is like this ' if ml64_32 == "ml32" ' or ' if ml64_32 == "ml64" ' . The purpose for this command is I want to select between ml64 and ml32.
But I dont know why I cant pass the check and sure also I can't get the correct netlist.
Can any1 can help me on this?
Rdgs
tok