-- megafunction wizard: %ALTERA_MULT_ADD v16.0% -- GENERATION: XML -- multiplier_adde

Status
Not open for further replies.
S

shaiko

Advanced Member level 5
Joined
Aug 20, 2011
Messages
2,644
Helped
303
Reputation
608
Reaction score
297
Trophy points
1,363
Activity points
18,302
Hello,

I created an ALTERA_MULT_ADD IP using Quartus Prime 16.0
And this is the VHDL output file I got:

Code: 
-- megafunction wizard: %ALTERA_MULT_ADD v16.0%
-- GENERATION: XML
-- multiplier_adder.vhd

-- Generated using ACDS version 16.0 211

library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;


entity multiplier_adder is
	port (
		result  : out std_logic_vector(31 downto 0);                    --  result.result
		dataa_0 : in  std_logic_vector(15 downto 0) := (others => '0'); -- dataa_0.dataa_0
		datab_0 : in  std_logic_vector(15 downto 0) := (others => '0'); -- datab_0.datab_0
		chainin : in  std_logic_vector(31 downto 0) := (others => '0')  -- chainin.chainin
	);
end entity multiplier_adder;

architecture rtl of multiplier_adder is
	component multiplier_adder_0002 is
		port (
			result  : out std_logic_vector(31 downto 0);                    -- result
			dataa_0 : in  std_logic_vector(15 downto 0) := (others => 'X'); -- dataa_0
			datab_0 : in  std_logic_vector(15 downto 0) := (others => 'X'); -- datab_0
			chainin : in  std_logic_vector(31 downto 0) := (others => 'X')  -- chainin
		);
	end component multiplier_adder_0002;

begin

	multiplier_adder_inst : component multiplier_adder_0002
		port map (
			result  => result,  --  result.result
			dataa_0 => dataa_0, -- dataa_0.dataa_0
			datab_0 => datab_0, -- datab_0.datab_0
			chainin => chainin  -- chainin.chainin
		);

end architecture rtl; -- of multiplier_adder
-- Retrieval info: <?xml version="1.0"?>
--<!--
--	Generated by Altera MegaWizard Launcher Utility version 1.0
--	************************************************************
--	THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--	************************************************************
--	Copyright (C) 1991-2016 Altera Corporation
--	Any megafunction design, and related net list (encrypted or decrypted),
--	support information, device programming or simulation file, and any other
--	associated documentation or information provided by Altera or a partner
--	under Altera's Megafunction Partnership Program may be used only to
--	program PLD devices (but not masked PLD devices) from Altera.  Any other
--	use of such megafunction design, net list, support information, device
--	programming or simulation file, or any other related documentation or
--	information is prohibited for any other purpose, including, but not
--	limited to modification, reverse engineering, de-compiling, or use with
--	any other silicon devices, unless such use is explicitly licensed under
--	a separate agreement with Altera or a megafunction partner.  Title to
--	the intellectual property, including patents, copyrights, trademarks,
--	trade secrets, or maskworks, embodied in any such megafunction design,
--	net list, support information, device programming or simulation file, or
--	any other related documentation or information provided by Altera or a
--	megafunction partner, remains with Altera, the megafunction partner, or
--	their respective licensors.  No other licenses, including any licenses
--	needed under any third party's intellectual property, are provided herein.
---->
-- Retrieval info: <instance entity-name="altera_mult_add" version="16.0" >
-- Retrieval info: 	<generic name="number_of_multipliers" value="1" />
-- Retrieval info: 	<generic name="width_a" value="16" />
-- Retrieval info: 	<generic name="width_b" value="16" />
-- Retrieval info: 	<generic name="width_result" value="32" />
-- Retrieval info: 	<generic name="gui_4th_asynchronous_clear" value="false" />
-- Retrieval info: 	<generic name="gui_associated_clock_enable" value="false" />
-- Retrieval info: 	<generic name="gui_output_register" value="false" />
-- Retrieval info: 	<generic name="gui_output_register_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_output_register_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_output_register_sclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_multiplier1_direction" value="ADD" />
-- Retrieval info: 	<generic name="gui_addnsub_multiplier_register1" value="false" />
-- Retrieval info: 	<generic name="gui_addnsub_multiplier_register1_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_addnsub_multiplier_aclr1" value="NONE" />
-- Retrieval info: 	<generic name="gui_addnsub_multiplier_sclr1" value="NONE" />
-- Retrieval info: 	<generic name="gui_multiplier3_direction" value="ADD" />
-- Retrieval info: 	<generic name="gui_addnsub_multiplier_register3" value="false" />
-- Retrieval info: 	<generic name="gui_addnsub_multiplier_register3_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_addnsub_multiplier_aclr3" value="NONE" />
-- Retrieval info: 	<generic name="gui_addnsub_multiplier_sclr3" value="NONE" />
-- Retrieval info: 	<generic name="gui_use_subnadd" value="false" />
-- Retrieval info: 	<generic name="gui_representation_a" value="UNSIGNED" />
-- Retrieval info: 	<generic name="gui_register_signa" value="false" />
-- Retrieval info: 	<generic name="gui_register_signa_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_register_signa_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_register_signa_sclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_representation_b" value="UNSIGNED" />
-- Retrieval info: 	<generic name="gui_register_signb" value="false" />
-- Retrieval info: 	<generic name="gui_register_signb_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_register_signb_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_register_signb_sclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_input_register_a" value="false" />
-- Retrieval info: 	<generic name="gui_input_register_a_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_input_register_a_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_input_register_a_sclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_input_register_b" value="false" />
-- Retrieval info: 	<generic name="gui_input_register_b_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_input_register_b_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_input_register_b_sclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_multiplier_a_input" value="Multiplier input" />
-- Retrieval info: 	<generic name="gui_scanouta_register" value="false" />
-- Retrieval info: 	<generic name="gui_scanouta_register_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_scanouta_register_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_scanouta_register_sclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_multiplier_b_input" value="Multiplier input" />
-- Retrieval info: 	<generic name="gui_multiplier_register" value="false" />
-- Retrieval info: 	<generic name="gui_multiplier_register_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_multiplier_register_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_multiplier_register_sclr" value="NONE" />
-- Retrieval info: 	<generic name="preadder_mode" value="SIMPLE" />
-- Retrieval info: 	<generic name="gui_preadder_direction" value="ADD" />
-- Retrieval info: 	<generic name="width_c" value="16" />
-- Retrieval info: 	<generic name="gui_datac_input_register" value="false" />
-- Retrieval info: 	<generic name="gui_datac_input_register_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_datac_input_register_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_datac_input_register_sclr" value="NONE" />
-- Retrieval info: 	<generic name="width_coef" value="18" />
-- Retrieval info: 	<generic name="gui_coef_register" value="false" />
-- Retrieval info: 	<generic name="gui_coef_register_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_coef_register_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_coef_register_sclr" value="NONE" />
-- Retrieval info: 	<generic name="coef0_0" value="0" />
-- Retrieval info: 	<generic name="coef0_1" value="0" />
-- Retrieval info: 	<generic name="coef0_2" value="0" />
-- Retrieval info: 	<generic name="coef0_3" value="0" />
-- Retrieval info: 	<generic name="coef0_4" value="0" />
-- Retrieval info: 	<generic name="coef0_5" value="0" />
-- Retrieval info: 	<generic name="coef0_6" value="0" />
-- Retrieval info: 	<generic name="coef0_7" value="0" />
-- Retrieval info: 	<generic name="coef1_0" value="0" />
-- Retrieval info: 	<generic name="coef1_1" value="0" />
-- Retrieval info: 	<generic name="coef1_2" value="0" />
-- Retrieval info: 	<generic name="coef1_3" value="0" />
-- Retrieval info: 	<generic name="coef1_4" value="0" />
-- Retrieval info: 	<generic name="coef1_5" value="0" />
-- Retrieval info: 	<generic name="coef1_6" value="0" />
-- Retrieval info: 	<generic name="coef1_7" value="0" />
-- Retrieval info: 	<generic name="coef2_0" value="0" />
-- Retrieval info: 	<generic name="coef2_1" value="0" />
-- Retrieval info: 	<generic name="coef2_2" value="0" />
-- Retrieval info: 	<generic name="coef2_3" value="0" />
-- Retrieval info: 	<generic name="coef2_4" value="0" />
-- Retrieval info: 	<generic name="coef2_5" value="0" />
-- Retrieval info: 	<generic name="coef2_6" value="0" />
-- Retrieval info: 	<generic name="coef2_7" value="0" />
-- Retrieval info: 	<generic name="coef3_0" value="0" />
-- Retrieval info: 	<generic name="coef3_1" value="0" />
-- Retrieval info: 	<generic name="coef3_2" value="0" />
-- Retrieval info: 	<generic name="coef3_3" value="0" />
-- Retrieval info: 	<generic name="coef3_4" value="0" />
-- Retrieval info: 	<generic name="coef3_5" value="0" />
-- Retrieval info: 	<generic name="coef3_6" value="0" />
-- Retrieval info: 	<generic name="coef3_7" value="0" />
-- Retrieval info: 	<generic name="accumulator" value="NO" />
-- Retrieval info: 	<generic name="accum_direction" value="ADD" />
-- Retrieval info: 	<generic name="gui_ena_preload_const" value="false" />
-- Retrieval info: 	<generic name="gui_accumulate_port_select" value="0" />
-- Retrieval info: 	<generic name="loadconst_value" value="64" />
-- Retrieval info: 	<generic name="gui_accum_sload_register_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_accum_sload_register_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_accum_sload_register_sclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_double_accum" value="false" />
-- Retrieval info: 	<generic name="chainout_adder" value="YES" />
-- Retrieval info: 	<generic name="chainout_adder_direction" value="ADD" />
-- Retrieval info: 	<generic name="port_negate" value="PORT_UNUSED" />
-- Retrieval info: 	<generic name="negate_register" value="UNREGISTERED" />
-- Retrieval info: 	<generic name="negate_aclr" value="NONE" />
-- Retrieval info: 	<generic name="negate_sclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_systolic_delay" value="false" />
-- Retrieval info: 	<generic name="gui_systolic_delay_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_systolic_delay_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_systolic_delay_sclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_pipelining" value="0" />
-- Retrieval info: 	<generic name="latency" value="0" />
-- Retrieval info: 	<generic name="gui_input_latency_clock" value="CLOCK0" />
-- Retrieval info: 	<generic name="gui_input_latency_aclr" value="NONE" />
-- Retrieval info: 	<generic name="gui_input_latency_sclr" value="NONE" />
-- Retrieval info: 	<generic name="selected_device_family" value="Cyclone V" />
-- Retrieval info: 	<generic name="reg_autovec_sim" value="false" />
-- Retrieval info: </instance>
-- IPFS_FILES : multiplier_adder.vho
-- RELATED_FILES: multiplier_adder.vhd, multiplier_adder_0002.v

For some reason, when I try to simulate the IP using Modelsim (Altera Starter Addition) - I get the following warning:
Warning: (vsim-3473) Component instance "multiplier_adder_inst : multiplier_adder_0002" is not bound.
Click to expand...
 

You need to find the entity and architecture source code for 'multiplier_adder_0002'.

Kevin Jennings
 
Reactions: shaiko

    S

    shaiko

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…