Hello,
Yes, Using AWR OEM product TestWave or Softplot for Microwave Office (MWO) from Aphena links are given below
https://web.awrcorp.com/Products/Other_Products/index.php?bullet_id=7
https://www.softplot.com/
One can embedd or capture the Network Analyser S-parameter measured Data file (in touchstone format)
of a DUT, directly in MWO & then one can plot or even use this as a subcircuit model in any other schematic or
design...
The same file can be exported as touchstone S-parameter file to other EDA tools such as Sonnet, etc....
for Circuit or netlist analysis...
The TestWave or softplot tool integrates MWO software with a wide variety of popular
test equipment from manufacturers such as: Anritsu Wiltron, Rohde & Schwarz, Marconi Instruments,
Fluke/Philips, Tektronix, Boonton, LeCroy, Yokogawa, IFR, Wandel & Goltermann, Advantest,
Hewlett Packard and Agilent Technologies.
Equipment types supported by the TestWave product
include network analyzers, spectrum analyzers, modulation analyzers, and oscilloscopes.
The TestWave or softplot software integrates test and measurement equipment with both VSS and MWO simulators over RS-232, GPIB, or LAN.
---manju---