analogpr
Newbie level 4
- Joined
- Jan 13, 2014
- Messages
- 7
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 66
Hello! I am new to Maxwell 3D and i would like to use this software to extract sth like the picture below
The geometry of the device looks like this
The cathode and the three strips are made of aluminium
I have made the design and i have define the materials. I also set some excitations: 1V in the central strip, 0V in the rest of the strips and the cathode. I dont know if i have to define some boundary conditions and how to set the parameters two extract the first image i uploaded. And sth else, the solution type i selected was electrostatic. is that ok?
Thank you in advance
The geometry of the device looks like this
The cathode and the three strips are made of aluminium
I have made the design and i have define the materials. I also set some excitations: 1V in the central strip, 0V in the rest of the strips and the cathode. I dont know if i have to define some boundary conditions and how to set the parameters two extract the first image i uploaded. And sth else, the solution type i selected was electrostatic. is that ok?
Thank you in advance
