[SOLVED] MAX232 in Proteus simulation - no OUT signal

[Under89]

Hi ;-)

I'm trying to make a simulation of the Max232 with ATMega8 in Proteus 7.6.
Circuit diagram shown in the picture



Output signal from the ATMEGA seen on channel A.
Why there is no signal on channel B? (T1OUT)
(Hiddens pins are connected do Vcc(5V) and GND)

Thanks for your help

 

[thirunavukkarasu]

notice that their is some problem in capacitors in max232... their polarities ....

 

[Under89]

I corrected diagram but the problem still exists

 

[jayanth.devarayanadurga]

Zip and post your project files and Proteus file. I will test it.

 

[Under89]

Project files and .hex with program :wink:

 

[thirunavukkarasu]

Hey man out put is coming for your circuit... Please check your software... In my pc the op is coming... The op is amplified inverted input

- - - Updated - - -



SEE THE OP OF UR CIRCUIT

 

[Under89]

Wow
Thank You very much for testing my project. Now i see that i must reinstall Proteus, or install another version.
Fortunately, the problem was solved. Thanks