Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Matting connector required

Status
Not open for further replies.

moindsp

Newbie level 6
Joined
Sep 16, 2009
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Karlskrona
Activity points
1,412
matting connectors

Hi,
I have purchased used set top box with flash memory and connector, I want to program the flash memory to talk to my spartran FPGA kit, can someone guide me which connector it is and what mating connector is reqired. the dimensions are estimated

length < 18.50mm
Diameter unknown
connections 50 pin connector 25*X2
 

HI,
it looks a lot like this one:
Blob-Grab-2.jpg


I believe it is a Molex part # : 53748-0504
https://www.molex.com/molex/product...4_PCB_HEADERS.xml&channel=Products&Lang=en-US

you can find information about the whole family at:

https://www.molex.com/molex/common/...ion&chanName=family&pageTitle=FPC+Application

hope this helps,

Best regards,
/Farhad Abdolian
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top