jey86
Newbie level 3
please help me to do User Authentication Interface and Analyzing Interface in matlab to analyze brain wave form. (USB 2.0 to TTL UART 6PIN Module Serial Converter CP2102 is use to connect to LAPTOP. From this I am going to collect wave form in matlab).
(I attached a sample picture please refer that. )
Action field in the Interface:
Load : When clicking the “Load” button, it opens the serial port and check whether the source is connected properly or not. According to the condition it sets the value “Signal condition” field.
Output : When clicking the “Output” button, it reads the signal from the specified source; calculate the frequency component and power of each band and shows in a graphical manner.
Save Data: When clicking the “Save Data” button the calculated frequency components and power components are saved in a file.
Save Figure: When clicking the “Save Figure “button the figures of time domain signal and frequency domain signal are saved in machine.
Print : Printout of the saved data can be taken using the “Print” button
Exit : The application can be closed using the “Exit” button
(I attached a sample picture please refer that. )
Action field in the Interface:
Load : When clicking the “Load” button, it opens the serial port and check whether the source is connected properly or not. According to the condition it sets the value “Signal condition” field.
Output : When clicking the “Output” button, it reads the signal from the specified source; calculate the frequency component and power of each band and shows in a graphical manner.
Save Data: When clicking the “Save Data” button the calculated frequency components and power components are saved in a file.
Save Figure: When clicking the “Save Figure “button the figures of time domain signal and frequency domain signal are saved in machine.
Print : Printout of the saved data can be taken using the “Print” button
Exit : The application can be closed using the “Exit” button