Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

manipulate simulink input

Status
Not open for further replies.

chinsin83

Junior Member level 2
Joined
Dec 22, 2005
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,539
simulink variable selector

if i create a subsystem, how do i use the input from one of the input ports as a variable?

e.g. i wan to select a block size of n-by-n matrix from a bigger matrix. there is the block "submatrix", but it does not accept indexing output from other blocks unlike the "variable selector" block. but the "variable selector" block only selects rows or columns, it does not allow me to specify a block size that i wan.

can i mask the subsystem and create a parameter = one of the input port, so i can use it as a variable? and how do i do it?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top