Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Making Own SMPS. Need Advice Regarding Core Transformer

Status
Not open for further replies.

asking

Full Member level 5
Full Member level 5
Joined
Sep 21, 2010
Messages
279
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,298
Visit site
Activity points
3,377
Hello,

I am going to make Own Customized SMPS, i am able to find out each component except the Ferrite High Frequency Transformer. Please Be Adviced about making Ferrite Core Transformer or if readily available ? where to buy them ?
 

Hi there. Without knowing your specs it's difficult to say whether you will get a transformer that will meet your specs. If
you go to somebody like EPCOS , you can get transformer cores and wind your own.
**broken link removed**
You should find something that will meet your needs here.
Cheers
Neddie
 
  • Like
Reactions: asking

    asking

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top