Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Making changes from allegro to capture

Status
Not open for further replies.

johnkaz77

Junior Member level 1
Joined
Sep 22, 2010
Messages
16
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,396
Hello,it's the first time i'm designing a pcb and i have some questions.I've almost finished my design in allegro but there were some mistakes in the schematic from capture.For instance,i want to assign a different footprint on a potentiometer i am using and to supply it from a different power net than before,how can i make these changes without making the desing all over from scratch?I want the rest of the design to remain unaffected,if anyone can help...thank you.
 

kabaleevisu

Advanced Member level 2
Joined
Apr 14, 2010
Messages
616
Helped
85
Reputation
170
Reaction score
81
Trophy points
1,308
Location
Chennai,India
Activity points
4,512
hi ,
change the footprint for potentiometer and then generate net list after open PCB editor--->file -->import-->logic -->opening window select (radio button)place changed component choose --->Never-->
footprint is changed only in potentiometer
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top