Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

LVS global error:layout has changed in library since extract

Status
Not open for further replies.

alexhugo

Junior Member level 3
Joined
Oct 1, 2007
Messages
25
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,283
Activity points
1,486
I am having problem with LVS. Log file is as follows at the end

After I got this error message, I repeated the extraction again but I get the same error message again and again.

Please heeeeeeeeeeelp!


Running simulation in directory: "/home/alex/cad/LVS".



Begin netlist: Oct 22 18:08:33 2007
view name list = ("auLvs" "extracted" "schematic")
stop name list = ("auLvs")
library name = "alex"
cell name = "amplifier"
view name = "layout"
globals lib = "basic"
Running Artist Flat Netlisting ...
global error:
( amplifier layout ) in library alex has been changed since it was last extracted.
si: Netlist did not complete successfully.
End netlist: Oct 22 18:08:33 2007


Comparison program did not complete.
[/i]
 

you should save your layout. Then run lvs. It will be ok.
 

what it does is that during extract you are saving some markers into a layout view - it depends how your deck is written. SO effectively you modify your layout. Save the layout & extract before LVS run and you will be fine
 

Re: LVS global error:layout has changed in library since ext

Try saving and closing all the layout windows, and the extract again. If it does not work, you should contact some IT guys, because something is wrong.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top