Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

LVS Assura cmrf8sf sx_stamperrorfloat

Status
Not open for further replies.

kanounmoez

Junior Member level 1
Joined
May 26, 2007
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,376
Hi,
I have a problem when running assura lvs. the schematic and the layout match but an error layer window pop up saying : SX_StampErrorFloat.
How can I fix this problem.
thanks.
 

erikl said:
kanounmoez said:
SX_StampErrorFloat.
Guess: Unconnected substrate or well.
I don't thing so because I have my ring contact for the nwell and pwell.
Have you used cmrf8sf technology from IBM before?
 

kanounmoez said:
I don't thing so because I have my ring contact for the nwell and pwell.
Metal connection to gnd/vss resp. vdd?
kanounmoez said:
Have you used cmrf8sf technology from IBM before?
No, never.
 

you are better off asking the foundry/fab provider because you may be leaving out some details that you can't reveal on a public forum.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top