Lumped port joining ansoft HFSS

Status
Not open for further replies.
M

mtu

Member level 1
Joined
Nov 19, 2008
Messages
37
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,288
Activity points
1,465
How can I join lumped ports to give same excitation to an array of four patch elements on one substrate. Because if I assign separate lumped ports to each element, the gain it gives is based upon only one element and this is also true for other parameters.

Can we relate one port to another in terms of amplitude and phase.??
Thanks
 

i think u have to design a feed network for the 4 patch elements, u will have only one excitation port that feeds the a elements.
 

thanks, i got solution from other topic it is. hfss>fields>editsources, and u can assign scale factors to any sources to make them active
 

hi all, if there is some one can help me, I need example in HFSS to design Double ridge Horn Antenne,
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…