Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

LSM303DTR accelerometer-magnetometer documentation not clear

Status
Not open for further replies.

vinodstanur

Advanced Member level 3
Advanced Member level 3
Joined
Oct 31, 2009
Messages
751
Helped
114
Reputation
234
Reaction score
114
Trophy points
1,333
Location
Kerala (INDIA)
vinodstanur.blogspot.com
Activity points
7,054
Hi,
Doesn't any one tried double click/single click in LSM303DTR ? I am able to do it some how by trial and error but I don't know why ST is not providing a good user manual or documentation regarding the registers. I could find only this https://www.st.com/web/en/resource/technical/document/datasheet/DM00057547.pdf pdf which is not well documented and very difficult to understand and always need a trial and error to make some thing work.
Am I missing some thing?
 

The manual seems pretty clear on registers. What does not work? the I2C fast mode? at 400kHz.

Hi,
It is working fine. But I am unable to understand the datasheet because of limited documentation. For example, TIME_LATENCY, TIME_WINDOW, TIME_LIMIT, ACT_THS, ACT_DUR etc is not explanined properly so that I need to do trial and error to make it work.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top