pratikshinde
Newbie level 4
Dear All,
I am happy to announce that I am starting low cost, good quality PCB service for hobbyist and DIYers and Embedded Systems enthusiasts in India. As I could not find any service or manufacture interested in doing prototypes.
I have done a fair amount of research over PCB manufacturing for past couple of months. Please find details below
Specification:
Costs (In Rs)
Some constraints apply for penalizing and milling.
As of now available for Indian customers only.
This is new initiative so options are limited, Your suggestions, inputs and comments are most welcome.
Thanks,
Pratik Shinde
I am happy to announce that I am starting low cost, good quality PCB service for hobbyist and DIYers and Embedded Systems enthusiasts in India. As I could not find any service or manufacture interested in doing prototypes.
I have done a fair amount of research over PCB manufacturing for past couple of months. Please find details below
Specification:
Layers | Single and Double |
PCB Material | FR-4 |
Solder Mask Color | Green |
Silk Screen | White |
Maximum Size | 30cm X 30cm |
Qty | 3pcs |
Board Thickness | 1.6mm |
Board testing | BBT and Fly Probe testing |
Surface Finish | HAL SnPb |
Costs (In Rs)
Size / Cost | Single Layer | Double Layer |
5cmx5cm | 450 | 750 |
5cmx10cm | 750 | 1250 |
10cmx10cm | 1200 | 1950 |
Some constraints apply for penalizing and milling.
As of now available for Indian customers only.
This is new initiative so options are limited, Your suggestions, inputs and comments are most welcome.
Thanks,
Pratik Shinde