Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Low cost and best AC to DC conversion

Status
Not open for further replies.
P

purushothama

Junior Member level 1
Joined
Sep 22, 2010
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,380
Hi,
Can any one give me the solution for low cost and best AC to DC conversion method. output current is 100mA.
 

what will be the approx cost for this.it should operate for 50/60Hz
 

Do you need current source instead? AL9910 from Diodes Incorporated is the simplest I found so far. Again, unfortunately it's non-isolated topology. Just google the datasheet, it gives you complete circuit for typical application. Cheap as!
 

My specification is as follows 100-260V AC input 50/60Hz output 5V/100mA
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top