Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Loss calculation for Microstrip

Status
Not open for further replies.

pnnavigator0915

Member level 3
Joined
Feb 4, 2006
Messages
62
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,900
Hello guys..
Thank you for all your help previously. I have finally designed my Microstrip combiner and divider. I am now supposed to go for 3-way, 4-way, 5-way and 6-way on similar lines.

I need to calculate all kinds of losses in this Microstrip line designing issue.
Please help me out with the equations and some theory for these calculations

Thank You for kind attention.

Regards.
[/b]
 

sergio mariotti

Advanced Member level 1
Joined
Dec 22, 2003
Messages
468
Helped
69
Reputation
138
Reaction score
25
Trophy points
1,308
Location
Italy
Activity points
5,996
pnnavigator0915 said:
I need to calculate all kinds of losses in this Microstrip line designing issue.
Please help me out with the equations and some theory for these calculations

Thank You for kind attention.

Regards.[/b]
[/b]
Lot of papers and books has been wrote on this topic, it's practically impossible give here all known formulation.

But, in order to know accurately the µstrip loss, there is a simple, old fashioned, DOS program that is more accurate than µwave Office. Look for MWI.EXE by Rogers© Corporation.

MWI.EXE take in account dielectric losses, conductor losses, skin effect and metal roughness. The roughness play a very important role on loss determination.
 

pnnavigator0915

Member level 3
Joined
Feb 4, 2006
Messages
62
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,900
Thank you.

I have got the mwi.exe already and used that program to calculate the width and other factors involved in the Microstrip line designing.

I know it also gives all the types of losses, but still I am supposed to show some substantial theoretical calculation.

Hence only i needed the theory part of the loss calculation.
Kindly help me out with this.

Thank you for your kind attention.

Regards.
 

vfone

Advanced Member level 5
Joined
Oct 10, 2001
Messages
5,311
Helped
1,549
Reputation
3,101
Reaction score
1,161
Trophy points
1,393
Activity points
33,656
Message is unavailable.
 

pnnavigator0915

Member level 3
Joined
Feb 4, 2006
Messages
62
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,900
Thanks dude..

But infact my download size itself has a limit of 0.38 MB so i would not be able to downlaod it.

Ne other Source..

Thank you for your kind attention.

Regards
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top