Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking for program that can read IDF files

Status
Not open for further replies.

moses

Junior Member level 1
Joined
Mar 1, 2002
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
63
dos any body know a shareware or freeware peogram that can read Idf files?
 

idf file viewer

I have been looking and searching for a IDF file viewer myself never found anything.

So if anyone has something :?:

/P!SiX
 

idf files

moses said:
dos any body know a shareware or freeware peogram that can read Idf files?
+++++++++++++++++++++++++++
you can read them as l2 files .emn and emp as libary and component with
your WordPad but YOY can bulid them in Mech with program Colled PCB23D
and you can find at Solidedge site !
 

idf viewer freeware

HI CADPCB
can you give me a link to the program as i could not find the PCB23D
program.
thnk in advance

moses
 

idf file reader

moses said:
HI CADPCB
can you give me a link to the program as i could not find the PCB23D
program.
thnk in advance

moses
**broken link removed**
 

free idf viewer

hi,

Does anybody have any experiance with Expedition WG2000 IDF Export to PTC PRO/Engineer?

greetz, venz.
 

idf 4.0

we get PRO/Engineer idf files and inport to wg2000 no problem. did not try to export
 

idf file

circuitworks.
 

idf viewer free

Is there a plugin for Pads that will generate an IDF 4.0 file?

Eda
 

viewer idf

I am aware of V3 but not v4 IDf ??
 

how to read idf files

Apparently from the Circuitworks brochure there is an IDF 4.0 format. From what I am reading it can actually pull in traces and copper. Kinda cool...
I would like to check it out further to see if one can insert parasitics and actually create simulation models from data.
 

free idf reader

Here are the specs for IDF 2, 3 and 4
 

.idf files

edaedaeda said:
Apparently from the Circuitworks brochure there is an IDF 4.0 format. From what I am reading it can actually pull in traces and copper. Kinda cool...
I would like to check it out further to see if one can insert parasitics and actually create simulation models from data.

The problem is that none of the major ECAD vendors are supporting 4.0 (https://www.priware.com/Common/Systems.aspx). Are any of the MCAD vendors?
 
mentor + idf + viewer

Hi,
Check your CAD package. It might be able to download the idf file
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top