Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Looking for info about MSP430 pin current in I/O modes

Status
Not open for further replies.
K

kot_b

Advanced Member level 4
Joined
Dec 28, 2001
Messages
103
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,298
Location
Latvia
Activity points
696
MSP430 help needed

Hi, guy's!
Does somebody know somthing about MSP430 pin current in Input and Output modes(output mode on pin is 0) and reset circuity needed...
:)
 

Please describe your problem more precisely. I've made some projects with MSP430 without any problems with input/output.
Regards.
 

On some MSP models the RST pin sources relatively large current if it is not driven hard low or high, other than that the pins are standard I/O with sub-uA currents at room temp.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top