Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking for company that gives samples of Tx Rx ICs

Status
Not open for further replies.

Compy

Member level 2
Joined
Jan 24, 2005
Messages
52
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
454
is there ny company which distributes Tx Rx RF Ics as samples for educational purpose..
 

Sample Tx Rx Ics

are there any tutorial on use the tx rx chips?
 

Sample Tx Rx Ics

What tutorial you want, you don't need any. Just place a mic on the tx input and a suitable antenna. Also a small speaker and you got RF tx and RX.

You can use this chips in any data transmission system, remote control, Alarm systems,... etc.
 

Re: Sample Tx Rx Ics

seadolphine2000 said:
What tutorial you want, you don't need any. Just place a mic on the tx input and a suitable antenna. Also a small speaker and you got RF tx and RX.

You can use this chips in any data transmission system, remote control, Alarm systems,... etc.

do you know if there is any module with a DIP package insetead of an SMD ?
 

Re: Sample Tx Rx Ics

seadolphine2000 said:
What tutorial you want, you don't need any. Just place a mic on the tx input and a suitable antenna. Also a small speaker and you got RF tx and RX.

You can use this chips in any data transmission system, remote control, Alarm systems,... etc.

why do u need a speaker?
 

Re: Sample Tx Rx Ics

hello ,
where is hte link to that company i couldn't see
 

Re: Sample Tx Rx Ics

You can sample some RfPICs from Microchip. This would provide a integrated approach only needing an antenna.

Code:
 [url]https://www.microchip.com[/url]
 

Re: Sample Tx Rx Ics

yup we had maxim distributing free ic samples. we had done the same.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top