Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Looking for a small size balun in100~200MHz..??

Status
Not open for further replies.
L

LNA

Member level 3
Joined
Nov 19, 2009
Messages
64
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,735
anyone know a small size balun working around 150MHz? The smallest ones I found is from minicircuits with footprint of 3.8mm by 3.8mm. Any other verndors provide smaller one?

This is for small signal applications.
 

TDK and Tyco,you can have a look at their web sites
 

you could do a lumped element balun with 0402 components. You could also make an active balun with a single bipolar transistor and an emitter and collector resistor.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top