Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Logic Analyzer with 24 channels

Status
Not open for further replies.

2000

Member level 5
Joined
May 14, 2001
Messages
87
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
764
Hello friends,

I've been looking for a Logic Analyzer project that could run connected to a PC, via paralel, serial or even in an ISA or PCI(preferred) slot.
I've found some in the internet, but I'd like that someone that had really built one that works fine helped me indicating a good one with schematic and if possible the layout.
Anybody can help me?

regards,

2000
 

hi .. look at:
**broken link removed**


the same topic ..

73

cancel
 

I have built one which was in Elektor
a few years ago. Works quite well, except the the software is DOS.
Disadvantage is that you have to order 2PLD`s from elektor.
Clock speed was 50MHz
 

check h**p://www.bitscope.com/
best,
//a
 

hy whoops,

could you send me the plans for that???
which are the plds???

regards,

2000
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top